Technical Details

Application

  • Short circuit resistant fastening of all types of single and multi-core cables from extra high to low voltage
  • Single, trefoil, parallel, bundled or stacked fastening of energy cables

Material

High-grade polyamide, fibreglass-reinforced, coloured black, with special UV protection, fully recyclable, LSZH (low smoke, zero halogen), self-extinguishing, zero-halogen (free of fluorine, chlorine, bromine, iodine), non-toxic, non-corrosive, non-metallic, non-magnetic

 

    Temperature range

    Ambient temperatures
    down to -60°C*

    Continuous operation
    up to 120°C

    Permitted short-term heating
    up to 220°C

    Operation life
    more than 40 years of maintenance-
    and failure-free operation

    Legislation

    Legal compliance

    • Regulation (EG) Nr. 1907/2006 (REACH regulation)
    • Directive 2015/863/EU (RoSH)
    • SJ/T 11363-2006 (China RoSH)
    • United Arab Emirates Restrictions No. 10 (UAE RoSH)

    IEC 61914 STANDARD

    îd-Technik Cable Clamps have been type-tested by accredited test institutes to the international standard IEC 61914.

    Properties

    Resistance to
    Ultraviolet rays, ozone, mineral oils, fuels, salts, alkalis, alcohol, hydrocarbons, ketones, ether, termites and radioactive rays*

    Flame resistance
    UL 94 5 VA (IEC 60695-11-20)
    500 Watt flame test method

    UL 94 V-0 (IEC 60695-11-10)
    50 Watt flame test method

    IEC 61914 following IEC 60695-11-5
    Needle-flame test method

    Classification following DIN 5510,
    part 2: flammability class S3

    Thermal expansion
    0,01 % per 10°C temperature increase

    Tensile strength
    120 N/mm2

    Flexural strength
    210 N/mm2

    Resistance to impact
    Very heavy, type-tested to IEC 61914, at -60°C

    Lateral load test
    Type-tested to IEC 61914, in x- and
    y-direction, at 120°C

    Axial load test (N)
    Type-tested to IEC 61914, at 120°C

    Dynamic resistance to short circuits
    Type-tested to IEC 61914, suitable to withstand multiple short circuits

      Constructional features

      • Particularly high dynamic and mechanical strength and heat resistance due to special fibreglass-reinforced polyamide
      • Safe restraint of dynamic forces of high short circuit currents, without damage to the cables, also for multiple short circuits
      • Type-tested to IEC 61914 – cable cleats for electrical installations - reports from accredited institutes regarding dynamic short circuit currents, the fire-resistance of the material, and mechanical properties of the Cable Clamps are available
      • Very low surface pressure on cables due to Cable Clamps’ large contact area
      • Unrestricted application both indoor and outdoor in extreme climates such as deserts, tropics, high altitudes, arctic climate, coastal salt fogs, flooding, ozone due to special resistance to ageing, ultraviolet rays and ozone
      • Easy to mount without special instruments and maintenance-free
      • Fastening of Cable Clamps adaptable to all local conditions