NEW

VR2 SERIES

1

Design features

The design of the VR series allows the variable lining up and stacking of the individual Clamp types. An even and undisturbed power transmission is guaranteed by the innovative design, as the the parallel and vertical phase distance of the cables with 75 mm always remains the same.

2

Like a custom-made product

The dovetail connection enables flexible arrangement of the individual VR-Clamps and adaptation to the respective application.

3

Different cable diameters

Within different vertical levels cables with variating cable outside diameters can also be fastened. For each level the cables must have the same outer diameter, in order to ensure a secure fastening.**

PROPERTIES

Resistance to: Ultraviolet rays, ozone, mineral oils, fuels, salts, alkalis, alcohol, hydrocarbons, ketones, ether, termites and radioactive rays*
Flame resistance: UL94 5VA (IEC 60695-11-20)
UL94 V-0 (IEC 60695-11-10)
IEC 61914 following IEC 60695-11-5
Classification following DIN 5510,
part 2 Flammability class: S3
Thermal expansion: 0.01% per 10°C temperature increase
Tensile strength: 120 N/mm2
Flexural strength: 210 N/mm2

TEMPERATURE RANGE

Ambient temperature: down to -60°C*
Continuous operation: up to 120°C
Permitted short-term heating: up to 220°C
Operation life: more than 40 years of maintenance- and failure-free operation

 

MATERIAL

High-grade polyamide, fibreglass-reinforced, coloured black, with special UV protection, fully recyclable, self-extinguishing, low-smoke, zero halogen (LSZH), non-toxic, non-corrosive, non-metallic, non-magnetic

Applications:

For variable fastening of single- and multi-core cables. Universal application indoors and outdoors between -60°C and +120°C. Parallel and stacked formation. For vertical fastening of VPE cables we recommend the use of Elastic Inlays.*

Outer diameter of cables:

12 mm to 45 mm

Dynamic resistance to short circuits:

10.000 N

Axial retention:

400 N

Tightening Torque for fixing material:

Lowest bottom part: 20 Nm
All other parts: 8 Nm***

Legal compliance:

  • Directive 2015/863/EU (RoHS)
  • Regulation (EC) No. 1907/2006 (REACH regulation)

(click to enlarge)


Dimensions for cable outer diameter 21-45 mm.

Dimensions in mm

Typ DØ L1 L2 B h H1 H2+ H3+ c dØ Screw Thread
VR2 12-45 12-45 149 153 53 51 105-130 159-209 213-288 75 13 M12
DØ: Outer cable diameter
* For more information contact îd-Technik, please.
** Contact îd-Technik for diameter 12-21 mm, please.
*** Contact îd-Technik for trailing ables (EPDM, rubber, etc.), please.

Mounting examples

Arrangement of 4

VR4: Consisting of 2x VR2. For parallel and stacked mounting of 4-8 cables. Required are 2-3 x VR2 and 2-3 x VR3.

 

Torque for tightening the fastening material:

Lowest bottom part: 20 Nm

All other parts: 8 Nm*

 

Arrangement of 5

VR5:  Consisting of 1x VR2 and 1x VR3. For parallel and stacked mounting of 5-10 cables. Required are 2-3 x VR2 and 2-3 x VR3.

 

Arrangement of 6

VR6: Consisting of 2x VR3. For parallel and stacked mounting of 6-12 cables. Required are 4-6 VR3.

 

Arrangement of 7

VR7: Consisting of 2x VR2 and 1x VR3. For parallel and stacked mounting of 7-14 cables. Required are4-6 VR2 and 2-3 x VR3.

 

For fastening cables with an outer diameter of 12-21 mm contact îd-Technik, please.

 

 

* Contact îd-Technik for trailing cables (EPDM, rubber, etc.), please.
** For more information contact îd-Technik, please.