BE Series
PROPERTIES
| Resistance to: | Ultraviolet rays, ozone, mineral oils, fuels, salts, alkalis, alcohol, hydrocarbons, ketones, ether, termites and radioactive rays* |
| Flame resistance: | UL94 5VA (IEC 60695-11-20) UL94 V-0 (IEC 60695-11-10) IEC 61914 following IEC 60695-11-5 Classification following DIN 5510, part 2 Flammability class: S3 |
| Thermal expansion: | 0.01% per 10°C temperature increase |
| Tensile strength: | 120 N/mm2 |
| Flexural strength: | 210 N/mm2 |
TEMPERATURE RANGE
| Ambient temperature: | down to -60°C* |
| Continuous operation: | up to 120°C |
| Permitted short-term heating: | up to 220°C |
| Operation life: | more than 45 years of maintenance- and failure-free operation |
MATERIAL
High-grade polyamide, fibreglass-reinforced, coloured black, with special UV protection, fully recyclable, self-extinguishing, low-smoke, zero halogen (LSZH), silicone free, non-toxic, non-corrosive, non-metallic, non-magnetic
Applications:
Parallel and/or stacked fastening of trailing cables (single- and multicore). Universal application indoors and outdoors between -60°C and +120°C. For vertical fastening of VPE cables we recommend the use of Elastic Inlays.*
Outer diameter of cables:
70 mm to 85 mm
Dynamic resistance to short circuits:
20.000 N
Tightening Torque for fixing material:
Top part: 8 Nm**
Bottom part: 20 Nm
Different diameters and dimensions upon request.
Legal compliance:
- Directive 2015/863/EU (RoHS)
- Regulation (EC) No. 1907/2006 (REACH regulation)
Dimensions in mm
| Typ | DØ | L1 | B | I | h | H1 | a | c | dØ | Screw Thread |
|---|---|---|---|---|---|---|---|---|---|---|
| BE3 50/76 | 50-76 | 345 | 80 | 125 | 58 | 120-146 | 35 | 125 | 13,5 | M12 |
| BE3 70/85 | 73-78 | 440 | 88 | 150 | 68 | 141-146 | 35 | 145 | 13,5 | M12 |
DØ: Outer cable diameter
* For more information contact îd-Technik, please.
** Please contact îd-Technik for trailing cables (EPDM, rubber, etc.).