Mounting types
Suitable separation between Cable Clamps depends on:
- Peak short circuit current
- Dynamic short circuit resistance of the Cable Clamp
- Cable design, including bending stiffness (bending modulus)
UNIVERSAL MOUNTING OPTIONS
adaptable to local conditions
EASY TO MOUNT
respecting the tightening torques of the fastening material
MAINTENANCE-FREE
more than 40 years of maintenance- and failure-free operation
Use with two Elastic Inlays, e.g. KT 25/39-2
The Elastic Inlays must ONLY be inserted into the îd-Technik Clamps, not fixed, with the ribs running parallel to the cable lengthways.
To assist with mounting, Cable Clamps can be supplied with the Elastic Inlays cut to size and fixed in our factory.
To avoid negative impact on the retention, the Elastic Inlays should ONLY be fixed by îd-Technik.
The guarantee expires immediately if any form of adhesive eg. glue, silicone or paste is applied during installation of the clamps on site. Elastic Inlay must retain its full flexibility when used.
* Contact îd-Technik for trailing cables (EPDM, rubber, etc.), please.