Mounting types
Bundling
Suitable for bundled installation of multiple cables (including of different diameters)
Double Tower:
1 complete Clamp (= 1 top part + 1 bottom part) plus 2 additional bottom parts
Triple Tower:
1 complete Clamp (= 1 top part + 1 bottom part) plus 4 additional bottom parts
Multiple systems can be secured parallel with several towers next to each other.
Torque for tightening the fastening material:
Lowest bottom part: 20 Nm
All other parts: 5 Nm*
UNIVERSAL MOUNTING OPTIONS
adaptable to local conditions
EASY TO MOUNT
respecting the tightening torques of the fastening material
MAINTENANCE-FREE
more than 40 years of maintenance- and failure-free operation
Use with one Elastic Inlay e.g. K 26/38-1
Use with two Elastic Inlays, e.g. K 36/52-2
The Elastic Inlays must ONLY be inserted into the îd-Technik Clamps, not fixed, with the ribs running parallel to the cable lengthways.
To assist with mounting, Cable Clamps can be supplied with Elastic Inlays cut to size and fixed in our factory.
To avoid negative impact on the retention, the Elastic Inlays should ONLY be fixed by îd-Technik.
The guarantee expires immediately if any form of adhesive eg. glue, silicone or paste is applied during installation of the clamps on site. Elastic Inlay must retain its full flexibility when used.
* Contact îd-Technik for trailing cables (EPDM, rubber, etc.), please.